Fully automatic glass cutting machine accessories maintenance

Fully automatic glass cutting machineGlass cutting machine refers to a processing machine specialized in glass processing and material processingFully automatic glass cutting machine includes air-floating feeding table and double-bridge intersection type cutting table arranged at the head and tail. As an improvement, the double bridge intersection type cutting table in the upper frame length direction first part of the first straight beam and the second straight beam and the lower frame length direction first part of the third straight beam and the fourth straight beam between the four are equipped with a glass conveying mechanism including a rotating shaft, a number of conveyor wheels, motor, belt; air floating type feeding table in the length of the table at the end of the direction of the electric motor is connected to the electric motor's power supply control circuit, in order to control the electric motor start and stop the proximity switch, the upper end of the proximity switch is equipped with a proximity switch, the proximity switch, the proximity switch and the electric motor. proximity switch, the upper end of the proximity switch being slightly lower than said table surface. As a further improvement, the double bridge intersection type cutting table is provided with two vertical roller assemblies acting as a barrier to glass on both the first and second flat beams, and the four roller assemblies are arranged in a rectangular shape. In addition, it also has a manual breaking table, and the double bridge intersection type cutting table and the manual breaking table are arranged head to tail.

In the normal operation of the glass cutting machine, need to pay attention to a lot of aspects, in addition to the basic cutting speed, cutting thickness has been cutting height, the cutting gas also need to pay attention to. In order to improve the quality of the site automatic glass cutting machine cutting, Shanghai Wihong comprehensive over the years on the automatic glass cutting technology research and development experience, summarized in a few suggestions as follows:

To use a good automatic glass cutting machine, the first need for skilled control of the cutting nozzle flame, regulating the key in the gas source, most of the site oxygen for the pipeline oxygen supply, oxygen purity and pressure can generally meet the use of the requirements, but the gas is more for the bottled gas supply, 30 kg of a bottle of gas, in the scale of the 5 machine 5 streams, the use of time is about 2 hours or so, so that it is inevitable to change the gas source halfway through the gas pressure fluctuations, which leads to a big fluctuation in the gas pressure , directly affecting the gas flow, leading to irregularities in the cutting.